|
|
|
|
 |
Software Applications by Kader
|
| KaderFrame, $13.50 |
| KaderFrame solves plane frames and continuous beams. It calculates the normal forces, shearing forces, and bending moments, draws and prints their diagrams. It also draws and prints the deformation shape. Text files of most calculated data are created on the same directory of the program. The program designs the sections by working stress method and draw the frame and its sections to AutoCad 2000 file. The user can modify the design sections before and of course after drawing to AutoCad file. Only Metric system is used in this version. |
| KaderColumn, $13.50 |
| KaderColumn program deals with reinforced concrete tied short columns. It designs columns subjected to up to eleven cases of loading consisted of axial load and bending moment applied about the maximum principle axis. The program constructs the column strength interaction diagram (Bending moment-Axial load curve) from the input data of the cross-section and check if all input cases of loading being within the design curve.
If the input data of the cross-section is not sufficient the program increases them starting from the Min. Roh to the cross-sectional dimensions until all input cases of loading being within the design curve. The program suggests an arrangement of ties and draws them. |
| Kader Frame 2.0, $40.00 |
| KaderFrame 2.0 solves plane frames and continuous beams. It calculates the normal forces, shearing forces, and bending moments, draws and prints their diagrams. It also draws and prints the deformation shape. Text files of most calculated data are created on the same directory of the program. The program designs the sections by utimate strength method and draw the frame and its sections to AutoCad 2000 or 2002 file. The user can modify the design sections before and of course after drawing to AutoCad file. Only Metric system is used in this version. |
